Edelrid MEGAWATT Descender

MEGAWATT is a universal descender device for industrial climbers and rescue operations with a payload of up to 200 kg. The intelligent transmission mechanics of the descent lever facilitate a large operating range and exact adjustment of the speed at...

Kong Trimmer Nude

The TRIMMER NUDE is an incredibly smooth adjuster for custom created adjustable lanyards, longe, guy-lines…The user can self-make its own system that can be created choosing the most appropriate way for the situation on-point.It works with...

Edelrid PILOT BAR

PILOT BAR for support during the course and to ensure correct landing on the zip line. Features: Simplifies self-rescue and loadable up to 120kg Minimises twisting of the lanyard arms Minimises risk of strangulation

Edelrid SMART BELAY TIE IN LOOP

Lightweight, fast connection of SMART BELAY to a harness. Enables high degree of flexibility for exchanging used products on site, without requiring tools. Technical Information: Impact force : 22 kN Certification : EN 566 Material : 100% PES

Edelrid MAGO 8 Ultra-Light Descender

Ultra-light figure 8 descender for use on low-diameter ropes. The special geometry enables several different friction modes, making it possible to precisely adjust the abseiling speed. Features: Ultra-light, compact design for minimum weight and a small...

Edelrid SAFE DESCENT 10.5MM Descender

The Safe Descent is an innovative, compact Descent and Rescue device that is ideal for adventure parks, training centers and industrial climbing. Using the hand wheel, rescuers can unweight casualties, after which they can be safely lowered...

Kong Oka-X

SERVICE DESCENDER Service descender, version with a completely smooth loop for the connector inserting, without rubber or fins.Designed to be installed in the abseiling belay as a quick, safe and versatile tool in canyoning progression.It allows an easy...

Petzl PAW S Rigging Plate

For organizing the belay and creating a system with multiple anchors. Useful in aid climbing and for setting up Tyrolean traverses. Three anchor point holes Helps to equalize loads Lightweight and durable: made of aluminum Weight:  60...

Edelrid Eddy

Easy-to-operate semi-automatic belay device with assisted braking and maximum safety for sport and indoor climbing. Features: Controlled descent with an emergency brake system eliminates the ‘panic pull’ syndrome Large lowering lever to...

Edelrid HANNIBAL

The special geometry of the HANNIBAL enables various braking levels, making it possible to precisely adjust the abseiling speed. Features: Suitable for single ropes from 8.5–12.0 mm With internal rubber ring to hold the carabiner in...

Edelrid Ohm

Assisted-braking resistor for increasing rope friction when there is a large weight difference between the belayer and lead climber. In the event of a fall, the OHM increases the amount of rope friction so that a lighter belayer can hold a heavier lead...

Petzl SHUNT Rappel Back-up Device

Used below the rappel device, the SHUNT works as a rappel back-up and replaces friction hitches like the Prusik. Works on single and half ropes. Easy to install on the rope Smooth clamping surfaces won’t damage rope May be used on single or...